What are the reasons of blocking material of impact crusher?
Date：2019-08-09 15:09 Source：未知Views:
Impact crusher in the process of operation, often there will be a variety of problems, then work blocking material is one of the common reasons, so we encounter this phenomenon must be timely solution, if the solution is not timely, a small machine fault, it will become a big problem.
Today, we will learn about the causes and solutions of blocking materials:
1. Material moisture
Due to the excessive water content of the material, it may be that the material is glued to the impact crusher. The effective solution is to pre-heat the device in the impact plate and the feed port.
2. Feed speed
Impact crusher feed speed is too fast, the machine processing speed is slow, overload work, so it is inevitable that there will be blocking of the material.
3. Improper operation
In the process of use, due to the incorrect operation of the cause of universal existence, so it should be correct according to the specification of the operation.
4. Design problem of crusher
The crusher design problem, this problem is not easy to solve, should contact the manufacturer, appropriate listen to the advice of technical experts.
5. Material hardness
The reason for the material is that the material may be too hard or broken raw material is too large, beyond the maximum crushing range of impact crusher. The effective solution is that the crushing size should not exceed the prescribed range and hardness.
We can provide high quality and efficient cement production line construction and transformation, please consult our customer service or give us a message, we will reply to you as soon as possible.